Storage process of oil bearing material contains material acceptance, measurement, primary cleaning, drying and storage. Normally, there is stems, clods and metallic impurity during material loading and off-loading. To make sure storage safety of oil materials should do primary cleaning firstly, the process contains sieve separating, magnetic separation and air separation, to remove big impurities, small impurities, iron impurities, light impurities and dust.

Water content of new harvested oil material is much too high, Normally, should reduce the water content rate to 13% and then put into storage, drying process should be done in stand drying tower. 

We has two types -- house type warehouse and vertical cylinder silo.

Vertical cylinder silo contains silo, vibrating sieve, drying tower and conveying equipments, and  is suitable for soybean, cottonseed, rapeseed, corn germ, rice bran and other raw materials storage.

The initial clearing operations usually include screening, magnetic selection, wind, etc., to remove he large miscellaneous, small miscellaneous, iron miscellaneous, light miscellaneous and dust. New oil materials usually are of high moisture content, generally it is necessary to reduce moisture to 13% before  warehousing, and the materials’ drying is finished  in the drying tower .